H20 Timber Beam and Plywood Concrete Pouring Material For Formwork System

H20 Timber Beam and Plywood Concrete Pouring Material For Formwork System

Outline

ForPro Timber beam is a standard component of formwork system,it is widely applied in projects like housing, civil engineering, transportation, hydropower and LNG etc. high quality raw material is selected to manufacture our product.

ForPro offers vraious plywood sheets with different size and grade. Forpro large size plywood is avalaible within the dimension of 2mx6m or on demand. The phenolic plywood are used in walls and slabs construction and they are very suitable for almost joint-free and fairfaced concrete finishes requirement as well as high numbers of utilisation. Plywood surface is coated with 220 g/m² phenolic resin. It ensures more repeated uses than conventional plywood and offers excellent fair-faced concrete finish surface.

Timber Beam Product dimension

Beam height: 200mm

Flange width: 80mm

Flange thickness: 40mm

Web thickness: 27mm

Technical data

Dimension tolerance

Number of recycles

The possible number of cycles depends on a multiplicity of external influences acting on the timber beam and correct application. A non-binding guide value is 60~100 cycles under optimum condition and very good treatment to the timber beam by the user.

Manufacture standard

GB/T 31265 Wood I beam for concrete form

EN13377 Prefabricated timber formwork beams-requirements, classification and assessment.

Plywood Technical Specification

1. Surface treatment: 220mg/m² Phenolic both side.

2. Standard size:1220x2440.

3. Max size of single piece 2mx6m (width x length) or any dimension on demand.

3. Thickness:15mm, 18mm, 21mm

4. Certification: ISO9001,ISO14001,CE

5. Moisture:8-14%

Applications

phenolic ply board

structural timber beams

H20 Timber Beam and Plywood Concrete Pouring Material For Formwork System Images